Line Pumps
The Moli Pumps / Bulldog Pumps / Ground Line / Landline Pumps / Statics / Trailers: these pumps have many descriptive names and are generally mounted on 7.5-10 tonne vehicles these are ideal machine where space is limited restricting the use of our boom pumps and where lower cubic metre outputs per hour are required.
A line pump uses pipes along the ground and are in 3m sections. These machines are ideal for the small builder, domestic, DIY use, where smaller quantities of concrete, (ideally 4 loads and under) are needed to be placed. We recommend ROMAN CONCRETE for volumetric concrete requirements.
Line pumps have minimal washout requirements when compared to boom pumps, once the pipeline is cleared of concrete the hoppers have minimal residual concrete left, (couple of wheelbarrows) making them extremely popular with residential users requiring concrete pumping down the garden but don’t have the full site facilities and washout areas like the large commercial building sites would have for cleaning out.
Aintree’s line pumps carry 40 linear metres of pipeline as standard equipment on board with one operative. (More pipes can be added if requested up to 60m please notify at the time of booking the distance in metres you require to reach so we can have the right equipment on the vehicle for your pour). Please note distances over 50m of pipeline would require additional labour, please call to discuss your project and our helpful office staff can advise further.
Aintree line pumps are ideal compact units to park out the front of a residential property and run the pipe down the side of a house to a rear extension, shed bases, summerhouses etc.
If longer distances and quicker outputs are required, we do suggest using one of our boom pumps with a static pipeline.
On the day of hire
We will require cement. The rule of thumb is one bag of cement for every 20m of pipeline. We use cement and water to form a grout which is pumped in front of the concrete to prevent it from initially blocking. The hirer is to supply this due to pump vehicle not being a goods carrying vehicle.
On site we recommend making a box using plywood and a tarpaulin to contain this excess concrete and water until it has cured, as shown in the images below:

We strongly recommend that all property / finished surfaces / general public are adequately protected as necessary – including under the pump, against splashing, overspray and dripping whatever the circumstances.
Aintree concrete pump operatives are fully credited with CPCS or NPORS cards. These are HSE recognised training bodies so you can rest assured that our team will work safely, professionally and in line with industry regulations.

